Betekenis van:
top of the line
top of the line
Zelfstandig naamwoord
- the best (most expensive) in a given line of merchandise
Hyperoniemen
Werkwoord
Voorbeeldzinnen
- Deal in top of the line of goods.
- Overseas subsidiaries are putting out top-of the-line products.
- That store sells top of the line purses but everyone knows they're really just cheap knock-offs made in China.
- The tangent S to the top of the head restraint shall be drawn perpendicular to the reference line.
- The tangent S to the top of the head restraint is drawn perpendicular to the reference line.
- In the case of separate front seats, the rear passengers’ head-impact zone shall extend for 10 cm on either side of the seat centre-line, in the top part of the rear of the seat-back.
- To provide for the use of steering wedges, measure the reference dimension k = 137 ±3 mm at 32 mm below the top surface and at a distance of 200 mm from the transverse centre line of the coupling. ( 2)
- By means of a spherical headform 165 mm in diameter an initial force producing a moment of 37,3 daNm about the R point is applied at right angles to the displaced reference line at a distance of 65 mm below the top of the head restraint, the reference line being kept in its displaced position in accordance with paragraph 6.4.3.2.
- .5 Tanks which are intended to hold liquids, and which form part of the subdivision of the ship, shall be tested for tightness with water to a head up to the deepest subdivision load line or to a head corresponding to two thirds of the depth from the top of keel to the margin line in way of the tanks, whichever is the greater, provided that in no case shall the test head be less than 0,9 metres above the top of the tank; if testing by water is impracticable, air leak testing while the tanks are subjected to an air pressure of not more than 0,14 bar may be accepted.
- If the presence of gaps prevents the application of the force prescribed above at 65 mm from the top of the head restraint, the distance may be reduced so that the axis of the force passes through the centre line of the frame element nearest to the gap.
- ‘length of a ship’, unless expressly provided otherwise, means 96 % of the total length on a water line at 85 % of the least moulded depth measured from the top of the keel, or the length from the fore side of the stem to the axis of the rudder stock on that waterline, if that be greater.
- ‘Rear windscreen reference line’ means as the geometric trace of the most forward points of contact between a sphere and the windscreen, when a sphere of diameter 165 mm is traversed across the windscreen top frame, including any trim, while maintaining contact with the windscreen (see Figure 11);
- .2 In the case of a ship not having a continuous bulkhead deck, the floodable length at any point may be determined to an assumed continuous margin line which at no point is less than 76 mm below the top of the deck at side to which the bulkheads concerned and the shell are carried watertight.
- For frontal protection systems of such shape that the top end of the straight edge makes first contact, then the geometric trace of 1000 mm wrap around distance will be used as the frontal protection system leading edge reference line at that lateral position.
- In the case of seats or bench seats without head restraints and seats or bench seats with detachable or separate head restraints, area 2 shall extend above a plane perpendicular to the reference line 100 mm distant from the top of the seat-back, other than parts of area 1.